 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| AZ2800 30 AMP MINIATURE POWER RELAY FEATURES * * * * * * 30 Amp switching capability DPST-NO and DPDT configuration Meets 8 mm creepage, 4 kV dielectric Class F construction Epoxy sealed version available UL, CUR file E44211, VDE pending CONTACTS Arrangement Ratings DPST (2 Form A) DPDT (2 Form C) Resistive load: Max. switched power: 560 W or 8310 VA Max. switched current: 30 A (N.O.), 3 A (N.C.) Max. switched voltage: 600 VAC or 30 VDC* * Note: If switching voltage is greater than 30VDC, special precautions must be taken. Please contact the factory. GENERAL DATA Life Expectancy Mechanical Electrical Operate Time Release Time Minimum operations 5 x 107 1 x 105 at 30 A 120 VAC Res. N.O. 15 ms typical 25 ms maximum with bounce 10 ms typical 25 ms maximum with bounce (with no coil suppression) Rated Load UL, CUR N.O. 30 A at 277 VAC General Use, 100k cycles 1 Hp at 120 VAC, 100k cycles 2.5 Hp at 240 VAC, 100k cycles 110 LRA / 25.3 FLA at 240 VAC (DC coils only), 30k cycles 3 A at 277 VAC General Use, 100k cycles Silver cadmium oxide or silver tin oxide <50 milliohms initially (6 V, 1 A voltage drop method) Dielectric Strength 1500 Vrms contact to contact (at sea level for 1 min.) 4000 Vrms contact to coil 2000 Vrms between contact sets Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration Shock 109 ohms minimum at 500 VDC DC: Greater than 10% of nominal coil voltage AC: Greater than 20% of nominal coil voltage At nominal coil voltage DC: -40C (-40F) to 85C (185F) AC: -40C (-40F) to 65C (149F) -40C (-40F) to 105C (221F) 0.062" (1.5 mm) DA at 10-55 Hz Operational, 10 g for 11 ms 1/2 sine pulse (no contact opening > 100usec) Non-destructive, 100 g for 11 ms 1/2 sine pulse P.B.T. polyester Quick connect tabs Note: Allow suitable slack on leads when wiring, and do not subject the terminals to excessive force UL, CUR N.C. Material Resistance COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature DC: 0.925 W AC: 2.6 VA DC: 5.0 W at 20C (68F) AC: 7.0 VA at 20C (68F) DC: 48C (86F) at nominal coil voltage AC: 68 C (122F) at nominal coil voltage Max. 155C (311F) Enclosure Terminals Max. Solvent Temp. Max. Immersion Time Weight 80C (176F) 30 seconds 86 grams 20 per plastic tray / 100 per carton box NOTES 1. All values at 20C (68F). 2. Relay may pull in with less than "Must Operate" value. 3. Specifications subject to change without notice. Packing unit in pcs ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2004-07-20 Junkersstrasse 3, D-82178 Puchheim, Germany AZ2800 RELAY ORDERING DATA COIL SPECIFICATIONS - DC Coil Nominal Coil VDC 6 12 24 48 110 Must Operate VDC 4.5 9.0 18.0 36.0 82.5 Max. Continuous VDC 10.5 20.7 41.8 83.4 190.5 Nominal Current mA 10% 272.0 140.0 68.5 34.5 15.2 Coil Resistance Ohm 10% 22 86 350 1,390 7,255 ORDER NUMBER* AZ2800-2C-6D AZ2800-2C-12D AZ2800-2C-24D AZ2800-2C-48D AZ2800-2C-110D COIL SPECIFICATIONS - AC Coil Nominal Coil VAC 12 24 120 220 240 277 Must Operate VAC 9.6 19.2 96.0 176.0 192.0 221.6 50 Hz Max. Continuous VAC 15.6 31.2 156.0 286.0 312.0 360.1 Nominal Current mA 10% 340.0 166.0 33.3 18.2 16.7 14.4 Coil Resistance Ohm 10% 8 45 1,125 3,800 4,500 6,000 ORDER NUMBER* AZ2800-2C-12A5 AZ2800-2C-24A5 AZ2800-2C-120A5 AZ2800-2C-220A5 AZ2800-2C-240A5 AZ2800-2C-277A5 * Substitute "2A" in place of "2C" to indicate 2 Form A contacts. Add suffix "E" to "2A" or "2C" to indicate silver tin oxide contacts. Add suffix "E" at the end of part number for sealed version. Add suffix "K" for 0.187 x 0.020 [4.8 x 0.5] coil terminals. MECHANICAL DATA MECHANICAL DATA .31 [8.0] .58 [14.8] WIRING DIAGRAM .63 [16.0] .18 [4.6] 1.00 [25.4] 6 x .250 [6.3] 1.62 [41.1] 2.35 [59.7] 1.04 [26.4] 1.36 [34.5] 2 4 3 0 .15 [3.8] 6 8 7 1 2 FORM C 8 x .032 [.8] 2 x DIM "A" DIM. "A" = .250 x .032 [6.3 x 0.8] - STANDARD 8 x .45 [11.4] 0 2 4 DIM. "A" = .187 x .020 [4.8 x 0.5] - SUFFIX "K" 6 8 1 .13 [3.3] 2 FORM A 2.69 [68.4] VIEWED TOWARD TERMINALS Dimensions in inches with metric equivalents in parentheses. Tolerance: .010" ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2004-07-20 Junkersstrasse 3, D-82178 Puchheim, Germany |
Price & Availability of AZ2800
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |